Thursday, June 30, 2022
HomeFeatured ArticlesDecoding Engine Decarbonization

Decoding Engine Decarbonization

Much like our bodies, our vehicles should also be kept in a healthy state, for optimum performance and maximum output. And the best way to ensure that is to pay attention to your vehicle’s heart; the Engine. While a timely service can make your vehicle run smoothly over the years, the damage inflicted due to ageing can only be dealt with specialised services like engine Decarbonization. But before decarbonizing your engine, it is important to know the basics of what an engine Decarbonization is.

The Need for Engine Decarbonization

Power, performance and mileage are the three most important things when it comes to any vehicle. Whether it is a diesel car or petrol, everyone loves to get their hands on the best out there. No matter which fuel you opt for, all modern-day vehicles run by burning fuel which results in creating sooty exhaust gases.

Even though most of this soot is filtered through particulate filters, the inside of your engine is still susceptible to carbon deposits that can suffocate it over time. Once your engine starts to acquire carbon deposits, direct repercussion can be seen on both vehicle performance as well as mileage.

Therefore, if you suddenly start noticing a substantial drop in fuel efficiency or optimum performance, one of the many reasons for it could be Engine Carbonization, which in turn gives rise to a dire need for Engine Decarbonization.

What is Engine Decarbonization?

As the name suggests the process of Engine Decarbonization involves the removal of carbon deposits that crucial engine components acquire as a result of ageing, improper fuel burning or low-quality fuel etc. Since a serious carbon buildup inside an engine can eventually lead to serious complications like engine valves not closing properly, spark plugs and exhaust sensor malfunction, soot spilling out of the exhaust etc.,

Thus, Engine Decarbonization is a preventive procedure that is often done when a vehicle clocks over 50 to 60 thousand kilometres on the odo. After Decarbonization, engine life is substantially improved along with an improvement in power, performance and mileage.

Types of Engine Decarbonization Procedures

The advice of getting your vehicle’s engine Decarbonized is a common thing to experience in local workshops. But before you decide to opt-in for the procedure, it is smarter to know the two methods through which Decarbonization is commonly carried out. 

  • The Mechanical Way

Decarbonization Process

For vehicles that have clocked lakhs of kilometres over time, or for those which haven’t aged as gracefully as they should, carbon deposit is a serious and quiet evident problem. Under the mechanical/physical technique, components such as the cylinder head, intake and exhaust valves, etc. are opened up so that carbon deposits can be manually scraped off.

The exhaust pipe and muffler is also taken off cleaned using a pressure washer. Under the expertise of a trained mechanic, this procedure can turn out to be highly successful. But with that said, mechanical methods can also prove to be disastrous when performed by an undertrained mechanic. This is the reason why the Chemical Method is often preferred.

  • The Chemical Way

A process that is easily carried out even by averagely skilled mechanics, the chemical procedure of Engine Decarbonization involves the use of alcohol-based chemical compounds. These chemicals are then added to the conventional fuel supply where they chemically break carbon deposits. As a result component such as fuel rings, pistons, injectors etc. are cleaned and the chemical is flushed out through the exhaust system.

As this method does not require opening up the engine, it costs less and is also a safer way to tackle the problem of carbon deposits. However, the chemical method should be used only as a preventive method since large deposits are better removed through manual scrapping.

The Bottom Line

Now that you have an idea of what Engine Decarbonization is, you can make a better decision as to whether or not you should go for it. Nonetheless, engine decarbonization should be carried out once you have tried all other methods to tackle the problem.

Secondly, since carbon buildup generally arises when the vehicle ages, decarbonizing engines that have done only a few thousand kilometres is surely not recommended.

Thirdly, one of the most import things to keep in mind is to choose a reliable platform like Go Mechanic to carry out a Decarbonization procedure. With Go Mechanic, you are assured of a seamless experience every time.

Also, read Carmakers And Their Favourite Audio Systems

Informative: Underbody Coating And How It Protects Your Car

Sankul Nagpal
Penultimate student of Law presiding over the courts of creativity

1 COMMENT

  1. My mechanic always tells me to do engine flushing. Thanks for relevant information I will tell him to avoid from future

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Trending Articles

GoMechanic Newsletter